Description: BladeRunner GT Series Intercooler
Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs...More Details »
Item #: 46-20051
SDP Hot Side Intercooler pipe- Drivers side 2006-2010 - SDP-1041New
Here at SDP we've designed a hot side/driver side IC pipe for the 2001-2010 Duramax trucks that fits perfectly with the stock turbo in place. Each pipe is made in house using precision tig welding with mandrel bent tubing. To get the best possible fitment, we came up with a design that took us longer to make but the result is easier install and no fitment issues for you, the installer. The silicone boots that we include are made for us with an additive to the silicone that helps them hold up to the high tempuratures which the hot side pipe will see.
These are in stock and are powdercoated to order with whatever color you choose. Allow 1-3 business days for coating. Feel free to mention in the comments which color you would like if you do not see it listed.
Item #: SDP-1041Screamin Diesel PerformanceIntercoolers and Pipes|Intercoolers and Pipes|Intercoolers and Pipes
Wehrli Custom Fabrication LBZ/LMM Basic Intercooler Pipe for Factory Y-BridgeNew
Passenger Side 3" Intercooler pipe to be used with Factory Y-bridge. Intercooler pipe has 2 braces for support to keep factory y-bridge from blowing out but it is only recommended for stock turbo application! Uses an o-ring seal at Y-bridge to eliminate boost leaks prone with the OE metal gasket. 2010 LMM and some 2009 will require Map sensor Seal which we include in the kit.
Item #: WCF100356Wehrli Custom FabricationIntercoolers and Pipes|Intercoolers and Pipes|Intercoolers and Pipes
Description: -3" Intercooler Pipe for factory y-bridge
-Heater Hose and Clamps
-Map Sensor Seal
Item #: WCF100356
Wehrli Custom Fabrication LBZ/LMM Y-Bridge KitNew
The LBZ/LMM 3" Y-Bridge Kit is an upgraded high flow intake kit for the 2006-2010 Duramax. The factory Y-bridge is a poorly designed two piece bridge that is prone to blowing apart under boost and creating poor drivability and excessive smoke. This is a one piece fabricated 3" bridge with a heavy duty machined bead roll on the end so the pipe cannot deform when the t-bolt clamp is tightened. This kit allows you to remove the EGR system for race use only. A 3" high flow inter cooler pipe compliments the y-bridge to offer a full 3" tract from inter cooler to engine. This 3" Y-Bridge kit will work in conjunction with our S400 over stock Twin Turbo Kit if you decide to upgrade in the future. 2010 LMM and some 2009 will require Map sensor Seal which we include in the kit.
Item #: WCF100605Wehrli Custom FabricationIntercoolers and Pipes|Intercoolers and Pipes|Intercoolers and Pipes
LLY, LBZ, LMM Duramas One Piece High Flow 3" Driver Side Intercooler pipe. Replaces the 2 1/2" OEM inter cooler with a full 3" pipe. The OEM Pipe uses a reverse style bead roll design at the turbo which is prone for blowing off of the turbo under higher boost levels than stock. the WCFab inter cooler pipe uses straight high pressure rated boots, no angled boots.
Item #: WCF100352Wehrli Custom FabricationIntercoolers and Pipes|Intercoolers and Pipes|Intercoolers and Pipes|Intercoolers and Pipes|Intercoolers and Pipes